Pegas Gonda 500x750 HORIZONTAL SHI II Generation semi automatisk sag.
Basic equipment of machine:
• The blade leading in guides with hardmetal plates and leading bearings and along cast iron pulleys.
• The blade is 6 grades sloped regarding the level of the vice => higher performance when cutting, profiles, longer bladelife, higher performance when cutting full materials.
• There is a guide situated on the firm beam on the drive side. On the tightening side there is the guide situated on the moving beam.
• The guide beams of the blade are adjustable in the whole working range. A giude moving is connected with a vice-jaw movement so that to achieve the minimum distance of the guide and material. That is why it is not neccessary to set the position manually.
• The guide beam of the blade is placed in linear rails (2 linear rails and 4 bearings) with high bearing capacity.
• The saw-band is equipped with a cover, which protects the operator from millings and cutting emulsion.
• Manuall tightening of band. Optional: Hydraulic tightening of band.
• Automatic indication of blade tension.
• A cleaning brush for perfect cleaning and function of blade, passive driven by pulley.
• Band drive of machine is solved by cone gear box with maintenanceless oil filling. Three-phases electromotor with double winding, with a frequency converter for a fluent regulation of the blade speed from 20 to 100 m/min. Sturdy flange with shaft.
• Termoprotection of engine.
• The cooling system for emulsion, leaded to the guides of the blade and by LocLine system directly to the cut groove.
• Massive base with a tank for chips. Base is designed for manipulation manipulation with machine by pallet truck and also by any hight lift truck or by crane.
• Indication of blade tightening and opening of the cover.
• Controlling 24 V.
• Hydrauilc unit out of machine – better cooling and comfortable access. It handles machine movements: pressure to the cut, urm up movement, vices movements, turning of the turntable. It contains a velve for setting of vice pressure.
• Two massive cylinders support material to be cut. Movable by linear leading. 
• Spray gun for chip rinsing.
• Lighting of workink space.
• Band saw blade.
• Set of spanners for common service.
• Manual instructions in eletronic form (CD).

Se vedlagte filer eller klikk her for å lese mer på leverandørens side >>

Leveringstid kan forekomme
Levering bekreftes etter at ordre er registrert

Cutting speed - fluently set:20-100 m/min
Diameter of the blade:6500x41x1,3 mm
Drive of the blade:5,5 kW
Drive of the hydraulic agregate:0,75 kW
Electric connection:3x400V, 50 Hz, TN-S
Motor of the band drive cooling:0,06 kW
Pump of the cooling emulsion:0,12 kW
The blade is sloped regarding the level of the vice:
The shortest cutting:18 mm
The shortest rest durring one cut:15 mm
The smallest divisible diameter:40 mm