Pegas Gonda 440x600 Horizontal SHI semi automatisk sag.
Basic equipment of machine:
• The blade leading in guides with hardmetal plates and leading bearings and along cast iron pulleys.
• The blade is 7 grades sloped regarding the level of the vice => higher performance when cutting, profiles, longer bladelife, higher performance when cutting full materials.
• There is a guide situated on the firm beam on the drive side. On the tightening side there is the guide situated on the moving beam.
• The guide beams of the blade are adjustable in the whole working range. A giude moving is connected with a vice-jaw movement so that to achieve the minimum distance of the guide and material. That is why it is not neccessary to set the position manually.
• The guide beam of the blade is placed in linear rails (2 linear rails and 4 bearings) with high bearing capacity.
• The saw-band is equipped with a guard, which protects the operator from millings and cutting emulsion.
• Manuall tightening of band. Optional: Hydraulic tightening of band.
• Automatic indication of blade tension.
• A cleaning brush for perfect cleaning and function of blade, passive driven by pulley.
• Drive of machine is solved by worm gear box with maintenanceless oil filling. Three-phases electromotor with double winding, with a frequency converter for a fluent regulation of the blade speed from 20 to 100 m/min. Sturdy flange with shaft. Termoprotection of engine.
• The cooling system for emulsion, leaded to the guides of the blade and by LocLine system directly to the cut groove.
• Massive base with a tank for chips. Base is designed for manipulation manipulation with machine by pallet truck and also by any hight lift truck or by crane.
• Indication of blade tightening and opening of the cover.
• Controlling 24 V.
• Machine is equipped with hydraulic system which controles all functions of the machine. It pushes the arm to cut, pulls up the arm, opens and closes vices, turnins the turntable for angular cuts.
• Spray gun for chip rinsing.
• Two massive cylinders support material to be cut. Movable by linear leading.
• Lighting of workink space.
• Band saw blade.
• Set of spanners for common service.
• Manual instructions in eletronic form (CD).

Se vedlagte filer eller klikk her for å lese mer på leverandørens side >>

Leveringstid kan forekomme
Levering bekreftes etter at ordre er registrert

Cutting speed - fluently set:20-100 m/min
Diameter of the blade:6060x34x1,1 mm
Drive of the blade:4,0 kW
Drive of the hydraulic agregate:0,85 kW
Electric connection:3x400V, 50 Hz, TN-S
Pump of the cooling emulsion:0,09 kW
The blade is sloped regarding the level of the vice:
The shortest cutting:10 mm
The shortest rest durring one cut:50 mm
The smallest divisible diameter:10 mm
Total input:5,5 kW